Акриловая Полиуретановая Краска
Z2-810
Waterbome acrylic polyurethane top coat (general purpose)
Product Overview/Product overview
This product is prepared using aqueous polyurethane resin as the film-forming base material, with HDI as the curing agent, and adding environmentally friendly pigments, fillers, and functional additives.
Product Features/Product features
The paint film dries quickly, has good film hardness and weather resistance, and high film丰满度 (fullness).
Product Use/Product use
It is mainly used for conventional anti-corrosion coatings, serving as a surface decoration for large steel structures, mechanical equipment and other metal components, with good outdoor weather resistance and anti-corrosion performance.Technical Parameters
Color: Various colors
Theoretical paint consumption: 1KG/ approximately 6-8 square meters
Application method: Spraying, rolling, brushing
Overpainting time: 5-12 hours
Construction environment: Construction is prohibited when the construction environment temperature is below 10°C and humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted parts.
Z2-860
Waterbomne acrylic polyurethane (for submersible pumps only)
Product Overview
A water-based two-component polyurethane topcoat made with aqueous hydroxyacrylate resin as the main film-forming substance and aqueous silicone-modified isocyanate as the curing agent.
Product Features
This product is suitable for engineering projects with high coating requirements. The paint exhibits excellent physical and chemical properties, providing superior protection to the coated substrate. Its film is bright, full-bodied, and has good water resistance.
Product Application
Excellent water resistance
High fullness
Technical Parameters
Color: Various colors
Theoretical paint consumption: 1KG/ approximately 6-8 square meters
Application method: Spraying, rolling, brushing, dipping
Overcoating time: 5-12 hours
Construction environment: Construction is prohibited when the ambient temperature is below 5°C or humidity is above 85%. Waterproofing and anti-freezing measures should be taken for already applied parts.
Suitable for metal surfaces with high requirements for water resistance and chemical medium resistance. Mainly used in water meters, submersible pumps, and sewage treatment equipment.
Z2-870
Waterbome acrylic polyurethane (high salt mist finish)
Product Overview/Product overview
This is a water-based two-component polyurethane topcoat, with aqueous hydroxyacrylate resin as the main film-forming substance and aqueous isocyanate as the curing agent.
Product Features/Product features
This product is suitable for engineering projects with higher requirements. The paint has excellent physical and chemical properties, providing excellent protection for the coated substrate. The paint film is bright, full, and has good salt spray resistance.
Product Application/Product use
It is mainly used for surface decoration of metal components such as wind power tower cylinders, mechanical equipment, and petrochemical oil pipes, with very excellent outdoor weather resistance and anti-corrosion performance.
Technical Parameters
Color: Various colors
Theoretical Paint Consumption: 1KG/Approximately 6-8 square meters
Application Methods: Spraying, Roller Coating, Brushing
Recoating Time: 5-12 hours
Construction Environment: Construction is prohibited when the ambient temperature is below 5°C or the humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted areas.
Z2-830
Waterborne aliphalic polyurethane top coat (rail type)
Product Overview
This product is prepared using aqueous ultra-weather-resistant acrylic resin as the film-forming base material, aliphatic polyisocyanate as the curing agent, and environmental-friendly pigments, fillers, and functional additives.
Product Features
It exhibits excellent paint film hardness and superior weather resistance, with high film fullness. It is suitable for use as a topcoat in coating systems requiring heavy-duty corrosion protection. It has good compatibility performance, excellent mechanical properties, and outstanding acid and alkali resistance.
Product Application
It is mainly applicable as a topcoat for steel structures in indoor and outdoor heavy-duty corrosion environments, bridge engineering, port machinery, ocean-going vessels, and rail transit system equipment coatings.
Color: Various colors
Theoretical paint consumption: 1KG/ approximately 6-8 square meters
Application method: Spraying, rolling, brushing
Recoating time: 5-12 hours
Construction environment: Construction is prohibited when the ambient temperature is below 5°C or the humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted parts.
Z2-850
Waterbome acrylic polyurethane (special for motor)
Product Overview/Product overview
This product is prepared using aqueous ultra-weather-resistant acrylic resin as the film-forming base material, aliphatic and polyisocyanate as curing agents, and adding environmentally friendly pigments, fillers, and functional additives.
Product Features/Product features
The paint film is full, dries quickly, has high cost-effectiveness, strong adhesion to cast aluminum, ultra-high thixotropy,不易流挂 (not prone to sagging), and has excellent decorative performance.
Product Application/Product use
High Fullness
High Adhesion
Technical Parameters/Technical parameters
Color: Various colors
Theoretical Paint Consumption: Approximately 6-8 square meters per 1KG
Application Method: Spraying, rolling, brushing, dipping
Recoating Time: 5-12 hours
Construction Environment: Construction is prohibited when the construction environment temperature is below 5°C or humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the already constructed parts.
Mainly used for various motors.
K-710
Waterbome acrylic amino paint
Product Features/Product features
The paint film has high gloss, easy construction, good film hardness and adhesion, high丰满度 (fullness) of the paint film, good protective weather resistance, and is suitable for various mechanical hardware parts with baking lines.
Product Use/Product use
Mainly applied to bicycles, steel drums, wheel hubs, tricycles, anti-theft doors, glass products, vacuum flasks, hardware, small mechanical parts, mechanical cover parts, etc.
Cost-effective
cost of economic
good decorative performance
decorative
Technical Parameters/Technical parameters
Color: Various colors
Theoretical paint consumption: 1KG/Approximately 6-8 square meters
Construction method: Spraying, rolling, brushing, dipping
Overpainting time: 5-12 hours
Construction environment: Construction is prohibited when the construction environment temperature is below 5°C and humidity is higher than 85°C. Waterproofing and anti-freezing measures should be taken for the already constructed parts.
| Company Name | Anhui Liuyuan New Material Technology Co., Ltd | Страна/регион | China |
| Тип бизнеса | Розничный продавец | Размер компании | 128 |
| Создание | August 6, 2020 | ||
| Адрес | No. 6 Diecui West Road, High tech Development Zone, Xuanzhou District, Xuancheng City, Anhui Province | ||
| Основные продукты | Мы специализируемся на производстве более десяти высококачественных красок на водной основе, включая защитную краску для стальной конструкции на водной основе, акриловое верхнее покрытие на водной основе, быстросохнущую магнитную краску на водной основе, металлическое верхнее покрытие на водной основе, акриловое полиуретановое верхнее покрытие на водной основе, водная акриловая аминокраска для выпечки, эпоксидная антикоррозийная краска на водной основе и многое другое | ||
Анхойская компания Liuyuan New Material Technology Co., Ltd. является комплексным высокотехнологичным предприятием, которое занимается исследованиями и разработками, производством, продажами, применением и обслуживанием водоосновных экологически чистых покрытий. Компания расположена в Парке химической промышленности зоны высокотехнологичного промышленного развития города Сюаньчэн, провинция Аньхой, и занимает площадь 18648 квадратных метров с годовым объемом производства 44000 тонн водоосновных покрытий. Она располагает двумя заводами со стальными конструкциями общей площадью 11000 квадратных метров, а также офисным зданием и зданием для исследований и контроля качества площадью 3500 квадратных метров.
Компания стремится к развитию зеленой индустрии и внедрила передовые отечественные производственные линии для водоосновных красок. Она специализируется на производстве более десяти видов высококачественных водоосновных красок, включая водоосновную защитную краску для стальных конструкций, водоосновную акриловую финишную краску, водоосновную быстросохнущую магнитную краску, водоосновную металлическую финишную краску, водоосновную акриловую полиуретановую финишную краску, водоосновную акриловую аминную краску для запекания, водоосновную эпоксидную антикоррозийную краску и другие. Компания предоставляет высококачественные "индивидуальные" водоосновные промышленные лакокрасочные продукты и комплексные строительные решения для клиентов из различных отраслей, получая высокую оценку от заказчиков. Мы накопили богатый успешный опыт в замене масляных покрытий на водоосновные в таких областях, как инженерная техника, автомобильные компоненты, железнодорожный транспорт и электромеханическое оборудование. В сентябре 2023 года будет создана новая производственная база в городе Хэфэй, что позволит эффективно увеличить производственные мощности покрытий, осуществить модернизацию продукции и оптимизацию структуры продукции. Это поможет постоянно повышать конкурентоспособность на рынке, удовлетворять растущие потребности клиентов и укреплять лидирующие позиции в отрасли.
Смотря в будущее, компания Liuyuan Water Paint будет придерживаться корпоративной философии, основанной на зеленых инновациях, стремлении к совершенству и взаимовыгодном сотрудничестве, и работать вместе с единомышленниками из всех сфер, поддерживающих индустрию охраны окружающей среды, чтобы создать зеленый дом.
Отправить запрос
